BepiColombo Enters Mercury Orbit After Eight Years in Space

Europe and Japan's BepiColombo has been captured by Mercury's gravity after an eight-year trip. Here is how it got there and what its two orbiters do next.

By SpaceTracker.live TeamPublished 8 min read
Artist's view of the joined BepiColombo orbiters circling Mercury, the cratered grey planet lit by a huge, bright Sun
Artist's impression: AI illustration made with Google Gemini, edited by SpaceTracker.live Team. Not an actual photo.

After eight years in space, Europe and Japan finally have a spacecraft circling the closest planet to the Sun. BepiColombo enters Mercury orbit as of Saturday, 21 November 2026, when a long engine burn slowed the spacecraft just enough for Mercury's weak gravity to catch it. The European Space Agency (ESA) shared the news on social media after flight controllers in Germany checked the data, which took several tense hours.

BepiColombo is a joint mission of ESA and the Japan Aerospace Exploration Agency (JAXA). It is only the third spacecraft ever to visit Mercury, and the first in more than ten years. Here is what happened on arrival day, why getting to Mercury is so hard, and what the two orbiters will do next.

Quick facts

  • Arrival: Saturday, 21 November 2026
  • Mission: ESA's Mercury Planetary Orbiter (MPO) and JAXA's Mercury Magnetospheric Orbiter, called Mio
  • Launched: 20 October 2018 on an Ariane 5 rocket from French Guiana
  • Journey: nearly 10 billion km, with nine planet flybys on the way
  • Next big step: the two orbiters separate on 9–10 December 2026
  • Science starts: April 2027

How BepiColombo enters Mercury orbit

Getting into orbit was not a single moment but a careful brake. According to Space.com's arrival-day report, ESA planned a 37-minute burn of the orbiter's chemical thrusters, starting at 18:24 UTC. The two orbiters were still joined together as one stack, with ESA's MPO doing the driving.

Nobody on Earth could watch it happen live. Mercury was about 152 million km away, so even radio signals moving at the speed of light needed roughly eight and a half minutes to cross the gap. You can check how long light takes to reach any planet with our light travel time calculator.

Then the team had to wait. As the Associated Press reported, controllers at ESA's operations centre in Darmstadt, Germany, studied the incoming data for several anxious hours before ESA was ready to confirm that BepiColombo had been captured.

The first orbit is a long, stretched loop. Over the coming months the spacecraft will fire its engines again and again to pull that loop in tighter, a process ESA plans step by step until spring 2027.

Why reaching Mercury is so hard

Mercury is close to Earth on a map of the solar system, so you might think it is an easy trip. It is the opposite.

A spacecraft heading toward the Sun keeps speeding up as it falls inward, much like a ball rolling down a hill. To stay at Mercury instead of shooting straight past it, a probe has to lose a huge amount of speed. Doing that with fuel alone would need far too much fuel.

So BepiColombo took the long way round. It flew past Earth once, Venus twice and Mercury six times. Each flyby used a planet's gravity like a brake. Electric thrusters on a third module, the Mercury Transfer Module, did the rest of the slowing down during the cruise. That module was dropped on 3 September 2026, as we explained in our earlier BepiColombo arrival guide.

ESA mission manager Santa Martinez put it simply in a pre-arrival briefing quoted by Eos: "Mercury is a challenging destination." Heat makes it even harder. The sunlit side of the planet can reach about 430°C, and the spacecraft carries special radiators and heat shields to survive.

A one-year delay on the way

BepiColombo was first meant to arrive in December 2025. In 2024, a power problem between the solar panels and the transfer module meant its electric thrusters could not run at full strength. Engineers redesigned the route, and the new plan added roughly a year to the trip.

That makes this weekend's success even more welcome for the teams in Europe and Japan. Every key step since then, from the transfer module's release in September to Saturday's capture, has gone to plan.

BepiColombo arrival timeline and final orbits at Mercury Timeline: transfer module released on 3 September 2026, capture into Mercury orbit on 21 November 2026, Mio released on 9 to 10 December 2026, Mio sunshield released on 16 December 2026, MPO reaches its final orbit in March 2027, science begins in April 2027. Below, a sketch of the two final polar orbits: MPO at 480 by 1,500 km taking 2.3 hours, and Mio at 590 by 11,640 km taking 9.3 hours. BepiColombo at Mercury: what happens when 3 Sep 2026 Transfer module released 21 Nov 2026 Captured into Mercury orbit 9–10 Dec Mio separates 16 Dec Mio's sunshield let go Mar 2027 MPO in final orbit Apr 2027 Science begins Mercury Mio (JAXA): 590 × 11,640 km, 9.3 h MPO (ESA): 480 × 1,500 km, 2.3 h Final polar orbits, not to scale. Altitudes above the surface, from ESA.
BepiColombo's arrival steps and the two orbiters' final orbits. Illustration: SpaceTracker.live, based on ESA's published timeline and fact sheet.

What happens next: two spacecraft, two orbits

Right now the two orbiters are still stuck together. That changes soon. According to the ESA BepiColombo fact sheet, MPO and Mio will separate on 9–10 December 2026.

Mio goes first. It will be released into a wide, stretched polar orbit, about 590 km above the surface at its lowest and 11,640 km at its highest, taking 9.3 hours per lap. On 16 December, MPO will drop the sunshield that protected Mio during the cruise.

MPO then keeps firing its engines to move closer in. Its final orbit is much tighter, between 480 and 1,500 km above Mercury, with one lap every 2.3 hours. Space.com reports it should reach that orbit around 10 March 2027, with regular science starting in April 2027.

This two-orbit plan is the big idea behind the mission. ESA's BepiColombo project scientist Geraint Jones told the Associated Press the team is looking forward to "unprecedented measurements taken by two spacecraft at the planet at the same time." One craft maps the planet up close, while the other watches the space around it from farther out.

What BepiColombo will study

Mercury is small, only a little bigger than our Moon, but it is full of puzzles. MPO carries 11 instruments and Mio carries five. Together they will look at:

  • The giant iron core. Mercury's core takes up a huge share of the planet. Scientists still do not know why.
  • The magnetic field. Mercury is the only rocky planet besides Earth with a global magnetic field. Mio is built to study it and the way the solar wind slams into it.
  • Ice in the dark. Craters near the poles never see sunlight. Earlier data suggested water ice may hide there, even on a planet this close to the Sun.
  • Strange "hollows". These bright, shallow pits look young and may form as material escapes from the surface.
  • The thin exosphere. Mercury has no real air, only a very thin layer of atoms that the Sun constantly strips away.

The orbiter also carries a laser altimeter to map mountains and valleys, X-ray and gamma-ray instruments to read what the surface is made of, and a radio experiment to probe the planet's inside. The nominal mission lasts one Earth year, which is about four Mercury years, with an extension already planned.

Only the third visitor to Mercury

Very few spacecraft have made this trip. NASA's Mariner 10 flew past Mercury three times in 1974 and 1975. Then NASA's MESSENGER became the first spacecraft to orbit the planet, from 2011 until it ran out of fuel and crashed into the surface in 2015.

The challenge has always scared engineers. As NASA's Mercury science lead Shoshana Weider told Scientific American, for a long time "people didn't think it was possible to get to Mercury orbit." The mission is named after Giuseppe "Bepi" Colombo, the Italian scientist who worked out the flyby tricks that made Mariner 10's visits possible.

BepiColombo now joins a busy year for ESA in deep space. Its asteroid mission Hera has also just arrived at its target, which you can follow on our Hera tracker, while JUICE is still on its long way to Jupiter.

Can you see Mercury yourself?

You cannot see BepiColombo, of course, but you can often spot Mercury with your own eyes. Because it stays close to the Sun, it only shows up low in the sky shortly after sunset or before sunrise, and only on some weeks of the year. Our planets visible tonight page tells you whether Mercury is up from your location, and the planet positions today page shows where it sits right now.

To follow the spacecraft itself, open our live BepiColombo tracker, or see Mercury and the other planets move in the Solar System Live view.

FAQ

When did BepiColombo enter Mercury orbit?
On Saturday, 21 November 2026, after a planned 37-minute engine burn that started at 18:24 UTC. ESA confirmed the capture several hours later.

Who runs BepiColombo?
It is a joint mission of the European Space Agency and the Japan Aerospace Exploration Agency. ESA built the Mercury Planetary Orbiter, and JAXA built Mio.

When will BepiColombo start sending science data?
Regular science operations are planned to begin in April 2027, once both orbiters are in their final orbits.

Why did it take eight years to reach Mercury?
A spacecraft must lose a lot of speed to stay at Mercury. BepiColombo used nine planet flybys and electric thrusters to slow down, and a power problem in 2024 added about a year to the trip.

Source: European Space Agency (ESA) ↗

#BepiColombo#Mercury#ESA#JAXA#Mio#MESSENGER
Share:WhatsAppXFacebook