Voyager 1 Stops Sending Data Just as It Reaches One Light-Day From Earth

NASA says Voyager 1 has sent no science or engineering data since 14 November 2026, though its radio tone still reaches Earth. Here is what went wrong and what comes next.

By SpaceTracker.live TeamPublished 8 min read
Artist's view of the Voyager 1 spacecraft in deep space, its white dish antenna turned toward a faint, distant Sun
Artist's impression: AI illustration made with Google Gemini, edited by SpaceTracker.live Team. Not an actual photo.

For almost a week, the most distant spacecraft ever built has been talking without saying anything. Since 14 November 2026, Voyager 1 stopped sending data to Earth. NASA's antennas still hear its radio tone, but the science readings and health reports that normally ride on that tone are missing. NASA announced the problem on its Voyager mission blog on 18 November, a day before it celebrated the probe reaching one light-day from Earth.

The good news is that the spacecraft is alive and still pointed at home. The hard part is distance. Every question engineers ask now takes about two days to answer. Here is what NASA knows so far, what probably went wrong, and how the team fixed a very similar problem two years ago.

Quick facts

  • Problem noticed: 14 November 2026, by a Deep Space Network antenna in Canberra, Australia
  • What still works: the carrier signal, the radio tone that normally carries the data
  • What is missing: all science and engineering data
  • Likely suspect: the onboard computer that collects and packages the data
  • Cause confirmed? Not yet. NASA says diagnosis could take weeks or longer
  • Distance: about 25.9 billion km, one light-day, passed on 18 November 2026

What NASA says happened on 14 November

On 14 November, one of the big dishes of NASA's Deep Space Network in Canberra "locked on" to Voyager 1, just as it does on any normal day. It picked up the carrier signal, but no data came with it.

That is an odd result. Normally the carrier is like a delivery truck. It arrives full of packages: readings from the science instruments, temperatures, voltages and other health checks. This time the truck arrived empty.

At a NASA event at the Jet Propulsion Laboratory (JPL) on Thursday, 19 November, Voyager project manager Suzanne Dodd explained it in plain terms. "We do have a very strong carrier signal," she told reporters, according to Space.com. The ground receivers simply could not find the "frame sync", the regular pattern that marks where each block of data begins.

Why NASA thinks Voyager 1 is still healthy

A strong carrier signal is actually a reassuring sign. To send any signal at all, Voyager 1 has to keep its 3.7-metre dish pointed at Earth with great precision. That job belongs to its attitude control computer, which fires small thrusters to keep the spacecraft steady.

If that computer had failed, the dish would drift and the signal would vanish completely. The fact that Canberra hears a clean tone tells NASA three things. The spacecraft has power, the attitude control system is doing its job, and the radio transmitter works.

Dodd also sounded calm at a news conference the same day. "We have an anomaly that is not unseen before," she said, as reported by Live Science. She added that she was confident the data would start flowing again, and warned that a probe this old and this far away will have more problems like this.

The likely suspect: the computer that packages the data

Voyager 1 carries three main computers. One points the spacecraft. One handles commands. The third, the flight data subsystem (FDS), gathers readings from the instruments and the spacecraft's sensors and bundles them into a single stream for the radio.

In its blog post, NASA pointed to this data-handling computer as the likely source of the trouble. It did not name a confirmed cause, and the team is still checking. But the symptom fits. If the FDS stops building proper data frames, the radio keeps transmitting a tone with nothing useful inside it.

Why every test now takes two days

This is where the light-day milestone stops being just a fun number. Voyager 1 passed one light-day from Earth at 10:16 GMT on 18 November. A radio command now needs a little more than 24 hours to reach it, and the reply needs another 24 hours to come back.

Why fixing Voyager 1 takes two days per step Diagram showing a command travelling about 24 hours from a Deep Space Network dish on Earth to Voyager 1, and the reply travelling about 24 hours back, so each test takes about two days. One question to Voyager 1 = about two days Earth DSN dishes: California, Spain, Australia Voyager 1 about 25.9 billion km 1. Command goes out: just over 24 hours 2. Reply comes back: just over 24 hours Ten test commands in a row = about 20 days of waiting
Each step of the investigation needs a round trip of about 48 hours. Illustration: SpaceTracker.live.

So engineers cannot try something, look at the result and try again within an hour, as they could with a satellite near Earth. They send one carefully planned command, then wait two days to learn what happened. NASA has said the diagnosis may take weeks or longer.

The data rate is also tiny. Even on a good day, Voyager 1 sends information slower than an old dial-up modem. You can see how long a signal takes to cross any distance with our light travel time calculator.

Voyager 1 stopped sending data before. Here is how NASA fixed it

The team has been here before, and NASA says that experience is guiding the current work. On 14 November 2023, exactly three years earlier to the day, Voyager 1 started sending unreadable data.

It took months to find the cause. In March 2024, engineers sent a command that made the spacecraft send back a full copy of the FDS memory. Comparing it with older copies, they found that one memory chip had failed, corrupting about 3% of the computer's memory.

Nobody can replace a chip 24 billion km away, so the team rewrote the software instead. They split the affected code into small pieces and tucked each piece into spare corners of the remaining memory. The first piece was sent on 18 April 2024, and JPL confirmed on 20 April that health data was coming back. Science data followed, and by June 2024 all the instruments that were then switched on were working again.

That repair took about five months from start to finish. This time, the team starts with much better knowledge of the computer's memory, but also with an extra 24 hours of delay on every exchange compared with 2023.

Is this linked to October's two-day silence?

NASA is also checking whether the new fault is connected to an earlier scare. On 18 and 19 October 2026, Voyager 1 went completely silent for about two days, then called home on its own. Data later showed that it had switched to a backup set of thrusters by itself.

After that, the spacecraft worked normally until 14 November. We covered that episode in our story on how Voyager 1 lost contact and recovered. Whether the two events share a cause is still an open question.

What is at stake

Voyager 1 is the only working spacecraft taking direct measurements this deep in interstellar space. Once the data link is restored, it should send readings from its two remaining science instruments: a magnetometer, which measures magnetic fields, and a plasma wave instrument, which senses charged particles around the probe.

Power is the other clock. The probe runs on plutonium-powered generators that lose about 4 watts every year. Earlier this year, engineers swapped three devices for lower-power ones so the instruments can keep running until at least the 50th launch anniversary in 2027. In NASA's light-day news release, Dodd described the routine that continues through all of this: "We listen to Voyager 1 every day and send commands to the spacecraft weekly."

NASA also admits that both Voyagers will eventually be lost to a problem nobody can fix. Its twin, Voyager 2, is still healthy and sending data from a different direction in space. Our Voyager 1 vs Voyager 2 guide explains how the twins ended up so far apart.

What happens next

For now, the plan is patient detective work. Engineers will study the carrier signal, send test commands, wait two days for each reply and narrow down which part of the data system has failed. If it is a memory problem like in 2023, a software patch may work again.

You can follow Voyager 1's live distance and signal time on our Voyager 1 tracker, and read how it got this far in our story on Voyager 1 becoming the first spacecraft one light-day from Earth. We will update this article when NASA shares news on the data link.

FAQ

Is Voyager 1 dead?
No. NASA still receives its carrier signal every day, which shows the spacecraft has power, is pointed at Earth and can transmit. Only the data is missing.

When did Voyager 1 stop sending data?
The team noticed it on 14 November 2026, when a Deep Space Network antenna in Canberra received the carrier signal without any science or engineering data.

Why does fixing Voyager 1 take so long?
It is one light-day away. Each command takes about 24 hours to arrive and the reply takes another 24 hours, so every test needs about two days.

Has this happened before?
Yes. In November 2023, a failed memory chip in the flight data computer stopped readable data for months. Engineers fixed it with a software patch in 2024.

Source: NASA ↗

#Voyager 1#NASA#JPL#Deep Space Network#flight data subsystem#interstellar space#one light-day
Share:WhatsAppXFacebook